Classified Advertising
Items Wanted
Items Wanted
Welcome to the Best Site
for Brass-Era and Antique Auto Classifieds
 |
||
 |
 |
 |
Click an Underlined Name to email the advertiser
Sellers assume complete responsibility for their listing(s)
Use of this Web site constitutes acceptance of the HCCA User Agreement
New Ads On
May 17, 2013
Roll over or Click the above Sponsors for details
Wanted: Atwood Mfg. Co. Or Atwood-Castle Co. Carbide Generator
Click photo to enlarge
Wanted : An Atwood or Atwood-Castle brass carbide generator as shown in the illustration (either a complete generator or parts).
Any condition is okay and I will pay a premium price.
The illustration shows a frame-mount version; however, I would be interested in a runningboard-mount model as well. Thank you.
Contact: , St. Paul, MN, (612) 804-1989
felloe band information
Am looking for supplier of metal felloe bands for 24" wooden felloe wheel.
There are several types and would like as much info before deciding which I will be using.
There are several types and would like as much info before deciding which I will be using.
Contact: , Nanaimo, BC, 250 729 7824
Bosch 1--2 Switch Wanted
Click photo for MORE photos
Wanted Bosch 1---2 Switch... Will pay top dollar for this switch.
Contact: , Providence, Rhode Island, 401-640-4429
Brass Head Light Needed
Click photo for MORE photos
I need 1 headlight.
It does not matter if there is a name badge, or a name on the badge. Will buy a pair.
Also interested in a set of parts lights as long 1 light can be restored out of the parts.
Contact: , Randolph, MN,
Rutenber Engine Parts Wanted
Click photo for MORE photos
Any 40-45HP Rutenber engine parts you may have are greatly needed to help complete an engine for my 1910 Westcott. I especially need a CRANKCASE and OIL PAN and any other castings you may have. The oil pump, valves, camshaft and Splitdorf Distributor are all missing as well. Cylinder spacing is 6.375" and the pistons are 4.750" diameter.
Leads or treasure maps are also almost as good as parts!!
A Special Thank You - To Frank Hurley for connecting me with the engine parts I have so far. He`s the kind of guy that makes our hobby great. Thank you Frank!!
Leads or treasure maps are also almost as good as parts!!
A Special Thank You - To Frank Hurley for connecting me with the engine parts I have so far. He`s the kind of guy that makes our hobby great. Thank you Frank!!
Contact: , Pecatonica, IL, (815) 262-6373
Dyneto-Entz Starter-Generator Wanted
Click photo to enlarge
Looking for a Dyneto-Entz starter generator.
It`s big, heavy and runs on 18 volts. Made in Syracuse, NY, it is mostly rectangular, as shown in the photograph.
These were used on brass-era Franklins, Whites and perhaps others. My application is a 1914 Franklin Series 5.
Also looking for an Eisemann magneto, type EDAJ6, and Corbin-Brown speedometer. Any 1914-1916 Franklin 6-30 parts also of interest.
It`s big, heavy and runs on 18 volts. Made in Syracuse, NY, it is mostly rectangular, as shown in the photograph.
These were used on brass-era Franklins, Whites and perhaps others. My application is a 1914 Franklin Series 5.
Also looking for an Eisemann magneto, type EDAJ6, and Corbin-Brown speedometer. Any 1914-1916 Franklin 6-30 parts also of interest.
Contact: , Troy, New York, (518) 276-8414
Sherwood Carburetor
Click photo to enlarge
Manufactured by the Sherwood Manufacturing Co, Buffalo NY it has 1" air inlet and a 1" pipe thread fitting to manifold.
Required to go onto a running car.
Thanks for any assistance!
Contact: , Mudgee NSW Au, 61 422219911
1910 Buick model 10 Piston and Cages wanted
Click photo to enlarge
Need 3 3/4" diameter by 3 3/4" height, .760 wrist pin (worn from .750?), 1.450 piston tip to wrist pin center, .190 wide ring grooves.
Want original cast iron std. bore piston.
One or a whole set! From 1908-1915 165 CID 4 cylinder motor should work.
Contact: , Harper Woods MI, (313).881-0042
1912 buick
wtd-1912 Buick model 29
I need a single valve and info on water jacket repair or
who manufactures the water jackets???
I need a single valve and info on water jacket repair or
who manufactures the water jackets???
Contact: , Mount Laurel NJ,
Moyer Automobile Literature Wanted
Looking for Moyer sales catalogs, post card photos, photos of cars being built in the factory, advertising pins, etc. Moyer autos were built by H.A. Moyer in Syracuse, NY from 1910 until 1915
Contact: , Sahuarita AZ, 520-399-2433
Set Of 35" X 4 1/2" All White Universal Tires Wanted
Looking for qty. 4 or 5 all white Universal ribbed tread tires, 35" x 4 ½" to fit a 26" rim.
Contact: , Sahuarita AZ, 520-399-2433
Wanted! Owners Of Cars With 26" Rims! Do You Need 35 X 4 1/2 Tires?
34" X 4" tires too small? 36" x 5" tires too big? 35" x 4 1/2" tires may be available. I`m starting a list of owners who would be interested in this size. These were made by Universal years ago. Firestone non-skids may also be available. If enough interest, the manufacturer may do a run. Contact me!
Contact: , Sahuarita AZ, 520-399-2433
Tubular axle chassis and running gear parts needed
Need 1901-02 Darracq 6.5 HP single cylinder engine, sliding gear trans, radiator, steering column, body, etc for tubular axle chassis and running gear.USA and foreign leads appreciated!
Contact: , Ocala Fla., 352 843 1624
27 inch wheels
I need very much 2 front and 2 rear 27" wheels and demountable rims for a Cadillac or similar size car...
condition of wood not too important. Thanks
condition of wood not too important. Thanks
Contact: , Plymouth MA, 508-333-3199
1910 Harley Davidson
Need a crank case for a 1910 Harley Davidson model 6 a, belt drive with timer. Broken shaft destroyed my
Case. Thank you
Case. Thank you
Contact: BOB ANTONIK, HEBER SPRINGS, AR 72543 USA , 501-362-7663
Wanted Rushmore Headlight Parts
I am looking for 9" & 11", aprox. Flared front, headlight parts, Rim, Back & Reflector. Any other parts, or complete. Your help is well appreciated. Thanks
Contact: , Rock Island,
1903 Ford Body or Parts
Help,I am trying to build an 8 hp 1903 Model A Ford Rear entrance tourneau and am looking for any body parts or original leather,also if you have any surplus mechanical parts please let me know,I would appreciate any help you can give to me.
I will be back in USA soon & I can come & have a look.
I will be back in USA soon & I can come & have a look.
Contact: , Neerim Other / FO,
Need info on Howard Jennings of Ca. ID theft victim! Leads?
Hello everyone. I am looking for contact info,present or old,on Howard Jennings of Calif. He may be deceased. He may have been a HCCA member years ago. He may have owned a Stanley. I belive he is a victim of identity theft. Thanks,George Albright,Ocala,Fla.
Contact: , Ocala Fla., 352 843 1624
1911 Buick Model 21 Front Fenders
Need to buy or borrow one or a pair of 1911 Model 21 Buick touring car front fenders, in order to have a new pair made at Rootlieb`s. A friend bought the 1911 project that was at Bakersfield which is missing its front fenders. Any help for this new HCCA member will be most appreciated.
Contact: Jeff Beaumont, Atascadero CA, (805) 674-9225
kingston Carbureator
looking for a kingston 5 bakk carbureator
Contact: leo warren, jackson MI, 517 764 3731
Rims wanted! 34 x 4 (26") for 1911 Cadillac.
Im searching for a set of 34 x 4 rims for my Cadillac. Would prefer a set of 4,5 or 6. I have hubs and dont mind re-spoking them but the rims must be useable. I will consider anything from rims to complete wheels...What have you got??
Contact: , Goulburn, NSW, Australia AU,
wanted drain petcocks
need three brass drain petcocks, the type without the spring and cotter pin, but with screw and D washer for my 1911 Ford
thank you
thank you
Contact: , cincinnati ohio,
9" searchlight etc
9" searchlight etc
Contact: , South Hero VT, 802-372-6521
1908-1909 Bendix
Seeking 1908-1909 Bendix Buggy, Hi-Lo, or Duplex built by Bendix Automobile Company of Chicago or Logansport, Ind. Any condition. Leads or information on surviving cars appreciated.
Contact: , Logansport Indiana, 574-992-8164
Grant Motor vehicle emblems
Interested in purchasing emblems/signs/advertising for any Grant vehicle MY 1913 to 1922
Contact: , Northville MI 48167 ,
27" Clincher tires
Looking for 27" clincher (36 x 4-1/2, 34 x 3-1/2) tires to fit my plain, clincher rims. Anything out there? I`d love to avoid making new rims and put my 1907 Frnklin back on the road!
Contact: , Gem Lake MN, 763-786-1518
Hudson Fenders & Body Parts
Looking for body parts or what have you for a 1910 Hudson
Contact: , Leighton IA, 6417805107
9" Dia. Brass Searchlight, & 30" Wide Brass Windshield
9" Dia. Brass Searchlight; Rushmore, Neverout, Solar, Gray & Davis, etc. Also, 30" Wide 2 Piece Brass Windshield. Will Pay Your Price For Nice Example Of Either!
Contact: , So. Hero VT, 802-372-6521
Transportation Needed
Need brass car engine transported from Oxnard to Bakersfield Swap Meet in April. Can be either pick up or open trailer
Contact: , Lake Forrest Park Washington, (206) 919-1949
Brass Tail Light Needed
I am in need of a Westchester #2 brass tail light for my 1910 Overland Model 38.
Contact: , Manchester Maryland, 410-374-9470
maxwell pars 1909-11
I am looking for a magneto, the housing it sit on and the vale gear. which sits on the grank case and any other parts. or any other part for my maxwell you may have for sale.
0044 7881832798 or 0044 1296662676
0044 7881832798 or 0044 1296662676
Contact: , leighton buzzard uk, 0044 7881832798
EMF 30 Right rear axle shaft
Urgently need right rear axle shaft for EMF 30, the longer one. Will purchase new or used both sides if necessary. Also consider a complete rear end assembly, condition of gears not important as long as axles are good. What have you? Want to get back on the road asap.
Contact: , Mahwah NJ, 201-327-7621
Brass-Era auto for a good home
Wish to buy complete pre-1915 car from longterm owner or estate. Need not run. Former Auto Museum Director with not much money but very knowledgeable of early cars with the desire to preserve and keep them on the road. Do you have an early car that you no longer need or can take care of properly
Contact: , Chagrin Falls OH,
20 by 2
need 20 by 2 clincler tires, smith or B/S flyer, original auto red bug material good unrestored one cylinder car.
Contact: , Mendota IL, 815 539 9898
Restoring 1924 Cadillac, someone cut the wheels down.
Need two wheels, or two steel felloes. Felloe marked KH #120. Original wheel number 8060 or 8062
Contact: , Clinton Township MI, 586-465-4843
wanted
wanted
Contact: , mendota illinois, 815 539 9898
Brass Car Parts Wanted for Immediate Purchase
I am looking for the following:
Bosch D4 2-Spark Magneto
Bosch 0-1-2 switch,
Bosch 2-1-2 switch.
Solarclipse head lamps 950s/1050s/1150s.
Warner Autometer and/or Speedometer
Continental rims and hardware (2) 26" size and (2) 28".
Locking ring rims (3) 28" and (3) 2
Thank you ahead of time!
Bosch D4 2-Spark Magneto
Bosch 0-1-2 switch,
Bosch 2-1-2 switch.
Solarclipse head lamps 950s/1050s/1150s.
Warner Autometer and/or Speedometer
Continental rims and hardware (2) 26" size and (2) 28".
Locking ring rims (3) 28" and (3) 2
Thank you ahead of time!
Contact: , Brampton Ontario CA, (905) 299-4917
Stewart 1:1 Swivel, Model 44
Wanted, either a complete swivel or the output shaft, gear and housing.
Contact: , Mansfield, MA,
Need fenders hauled from Bend Or. to Chicksah Ok. or Cleveland Oh.
Have two used front fenders in the Bend Oregon area. Would like to have them delivered to the Chickasha swap meet, Cleveland Ohio, or Chicago.
Contact: , Amherst Ohio, 440-233-8188
Looking for c.1903-c.1907 restored car or complete project
As you will see below I have been looking for an early Ford but of course these are almost impossible to find especially when on a budget. Is thing anything else out there (Not just Ford) for say $40K+/- US or less?
Really appreciate hearing from you.
Alex
Really appreciate hearing from you.
Alex
Contact: , Christchurch New Zealand,
Maxwell 2 cylinder 1910 engine wanted
I have:
2 frames
3 front ends
2 rear axles
2 steering columns
1 1/2 bodies
2 radiators
6 springs
3 cowls
2 seats
bunch of wheels and hubs
some rebuildable fenders and some for patterns
rough hood
transmission
broken crankcase
2 cranks
....but no engine
2 frames
3 front ends
2 rear axles
2 steering columns
1 1/2 bodies
2 radiators
6 springs
3 cowls
2 seats
bunch of wheels and hubs
some rebuildable fenders and some for patterns
rough hood
transmission
broken crankcase
2 cranks
....but no engine
Contact: , Bowdoin ME,
Original wooden wheels for American LaFrance type 12 1919 model
Looking for my project car those nice original wooden wheels for American LaFrance type 12 1919 model.
Wheels should be in good condition, but not so good condition wheels can be offered also.
If wheels are located in US, I have an contact there that can handle all the shippings etc.
Thank you.
Wheels should be in good condition, but not so good condition wheels can be offered also.
If wheels are located in US, I have an contact there that can handle all the shippings etc.
Thank you.
Contact: , helsinki hki FI,
Need a Set of Rare Firestone 12 Spoke Wheels
My 1912 Model T Touring needs a back-up pair of these metal Firestone Wheels, just in case..... Price to be negotiated.
Contact: , Berea Ohio, 215-872-9725 (Cell) 440-625-0884 (Home)
1913 Cadillac
I need a fuel level gauge that goes near the floorboard.
Contact: , Windham Conn,
1914 Buick Headlights
Looking for headlights/parts for 1914 Buick model B-36 roadster. I have buckets and misc. parts; need rims and reflectors. Any help would be appreciated. Thanks.
Contact: , Haddam CT, 8603454573
Pair of Brass Oil Side Lamps for 1904 Veteran Car
Looking for a pair of kerosene brass side lamps for a 1904 Pope Tribune auto. Ideally in original condition (unrestored) with rectangular mounting slotsm. Please email photos and price.
Contact: , Ashton under Lyne Lanc UK,
1900-1906 Chain drive rear axle. Leads?
Trying to help a friend with an early project. Pretty much any 1900-06 center chain drive rear axle in good condition will work,including Timken,American Ball Bearing,Weston Mott, etc. Leads appreciated! I will forward to him. Call weekdays 10-4 EST
Contact: , Ocala Fla., 352 843 1624
french tail light
I need a small brass tail light for a `09 Renault
Contact: b0b nunnink, Pompton Plains NJ, 9738396057
Looking for 1903-05 Ford Project - Not NRS
Looking for leads on an 03-05 Ford project (A, AC, C, F etc) prefer complete and original. Trying to get a feel of the market and if there is anything out there.
Contact: , Christchurch, NZ ,
E-M-F parts
#A 2044 gas tank outlet trap (filter), two #A 372-01 rear spring clips, left triple tier E & J sidelight with flare front (show quality)
Contact: , Prospect, PA, (724) 865-2548
Locomobile 1914 Starter wanted
Looking for a 1914 Locomobile starter, any condition. Any leads would be appreciated. Thanks- Mike 908-202-7182
Contact: , Berkeley Heights NJ, 908-202-7182
Wanted - Michigan And Mitchell Automobile Parts And Pieces.
Restoring a 1913 Michigan 40 and a 1910 Mitchell S touring. I`m always looking for any and all bits and pieces. Please email me with anything you have. Thank you
Contact: , Livonia NY, 5857381541
1912 shop manuel wanted
Please help I have a 1912 Flanders and I`m in the process of rebuilding a spare trans axle and I am sorta lost. I have been to the AACA Library with no luck
Any body have a manual or a photo copy
Any body have a manual or a photo copy
Contact: , West Chester Pa, 610 761-1402
25" Firestone demountable rims straight side
Looking for 25" Firestone straight side demountable rims and locking rings for 1920 Twin Six Packard. Complete wheels or leads welcome. Will have 4off 35x5 straight side tires {used) for sale or trade.
Contact: Josef Kubista, Kovarikova, Praha, +420 602 253 773
30" Brass Windshield
30" Wide Brass Windshield (2 sections, not single.)
No Dents Please! Glass irrelevant. Willing to pay your price for a nice one!
No Dents Please! Glass irrelevant. Willing to pay your price for a nice one!
Contact: , South Hero VT, 802-372-6521
1904 & 1905 Cadillac
Wanted-- copies of blueprints for 1-cylinder Cadillac engine /chassis. Also, does anyone know to whom had blueprints for sale on HCCA online about two years ago for 1-cylinder Cadillac? Please only persons from USA or Canada email, non from UK. Thanks! -- Don
Contact: , Holland MI,
Wanted ... 40 hp touring
I am looking for a 40 hp brass era touring car that is ready to tour. I have enough to work on now. other brass era touring cars considered.
Contact: Leo Warren, Jackson MI, 517 764 3731
Northway 4 cylinder engine or crankcase needed
Need crankcase, crank and or complete motor for a 4 cyl Northway could be 26-30 or 40 HP cast in pairs Aluminum crankcase. Call or email I have pics that can help Thanks Eric
Contact: , Baxter Ont , 705 424 0060 cell 705 2795045
Brass Spare Tire Side Mount
I am looking for a running board spare tire mount. Would prefer a brass double mount but would consider a single mount. Tire size of 4.5-5"
Contact: John Dolan, Huntington NY, 516-650-1006
Wanted White Tires
Wanted 4 old wore out white smooth tires. 30x3-1/2, for a static museum piece
Contact: , Oshawa On Ca,
Wanted, Studebaker Starter / Generator
Need Starter And Generator For 1922 Studebaker Touring
Contact: Paul Van Stratton, Kalamazoo, MI, 269-344-5714
Wanted: 1908-1911 4 cyl Maxwell Carburetor connecting tube.
I need the "J" shaped tube that connects the carburetor to the intake manifold on the ’08-10 (maybe also 1911) 4 cyl. 30 H. P. Maxwell. Please check your parts. Within the next month I must decide whether or not to cast one. If you also need this tube, please contact me very very soon. Thanks
Contact: , Richfield MN, 612 866-3293
Misc Parts Wanted
Hi. Looking for the following:
Schebler Model D Throttle Assy, 1 1/4" Throat, 2 3/4" Bolt Spacing.
Bosch Du4 Pencil, Porceline, Points Cover and Points Springs.
Font and Burner for Solar 41A Right Hand Side Lamp.
Thanks very much.
Schebler Model D Throttle Assy, 1 1/4" Throat, 2 3/4" Bolt Spacing.
Bosch Du4 Pencil, Porceline, Points Cover and Points Springs.
Font and Burner for Solar 41A Right Hand Side Lamp.
Thanks very much.
Contact: , Harpswell Me, 207-833-6537
Kiblinger
Need all parts for 1907/1908 Kiblinger. My car needs everything. Interested in all parts. Have cash. Please help me restore my highwheeler. Thanks
Contact: , Belding Mich, 616-794-9978
Need 2 gas head lights
Need a set of John Brown #16 head lights.Should be complete and have a good body and good bonnets.
Contact: , Kewaskum WI, 262-707-3790
2 cylinder coil box
Hi all
I’m looking for a 2 cylinder coil box, perfareably wooden without a switch, to take Model T stye coils.
All help appericated, thanks
I’m looking for a 2 cylinder coil box, perfareably wooden without a switch, to take Model T stye coils.
All help appericated, thanks
Contact: , Mudgee NSW Au, 612 422219911
Corcoran Burner Wanted
Wanted... Nickel plated Corcoran burner (with 10 holes around the wick slot) Please email if you have a spare.
Contact: , Vancouver WA,
Wanted - 33x4 tires
Looking for four (4) 33x4 straightside tires for a 25" rim. Would consider most anything useable to new condition. Could pick up at Chickasha in March.
Contact: , McPherson KS, 316-648-7887
Exhaust Manifold Needed
1914 Model 79 Overland exhaust manifold or the 1915 Model 83 version. Also looking for the Gray Davis starter for the 1914 79
Contact: Mark Thompson, West Chester PA, 610-476-7726
Wanted - Single Tube Tire Rims.
Wire spoked rims to fit 28" x 2-1/2" single tube tires, actual rim diameter would be about 23". Rims only or complete wheels. I`m interested in however many you have, one or more.
Contact: , Seattle WA, (206)763-4566
1911 Cadillac Electric Starter Wanted
I collect Delco Light equipment that Charles Kettering invented. As you know Charles and the "Barn Gang" invented the starter for the 1911 Cadillac. Does anyone have any idea where I might find a starter that would fit a 1911 or 1912 Cadillac?
Thanks for your help
Thanks for your help
Contact: , Fountain City IN,
Buick Engine Wanted
Looking for a early six cyl Buick engine, 14-15-16, cast in pair cylinders.
Contact: , Bonita Ca, 619 876 7538
1914 Locomobile Shop Manual Wanted
I am looking for a shop manual or the like for a 1914 Locomobile, a copy would be fine. Also looking for a set of rear fenders- one or pair- any condition Mike at 908-202-7182
Contact: , Berkeley Heights NJ, 908-202-7182
73 Brass-Era, Antique Auto & Classic Car ads today
| Click to Become |  |
an HCCA Member |
© 2013 Horseless Carriage Club of America